PD Questions for Plant Maintenance

HL7P 04
Confirm work activities and resources for the work
 PD
K1 how to identify the work activitiesQ1
K2 how to assess the resources needed from the information availableQ2
K3 how to prepare a work programmeQ3
K4 how to obtain clarification and advice where the resources required are not availableQ4
K5 evaluation of the work activities against project requirements and the requirements of significant external factorsQ5
K6 how to identify which work activities influence each otherQ6
K7 how to determine how long each work activity will take and the sequence of activitiesQ7
K8 how work activities and the use of resources can impact on zero and low carbon requirementsQ8
K9 how to identify alterations to the work programme to meet changed circumstancesQ9
K10 how to assess the contractual/work effects resulting from alterations to the work programmeQ10
K11 how to justify to decision makers the effects resulting from alterations to the work programmeQ11
HL7Y 04
Develop and maintain good working relationships
 PD
K1 how to maintain and encourage working relationships to promote goodwill and trust with relevant peopleQ1
K2 how to develop working relationships to promote goodwill and trustQ2
K3 how to apply the principles of equality and diversityQ3
K4 how to inform relevant people about work activities in an appropriate level of detail and with an appropriate degree of urgencyQ4
K5 how to encourage questions, requests for clarification and commentsQ5
K6 how to offer advice and help to people about work activitiesQ6
K7 how to clarify alternative proposals with the relevant peopleQ7
K8 how to suggest alternative proposalsQ8
K9 how to resolve differences of opinion in ways which minimise offence and maintain goodwill, trust and respectQ9
HL7N
Confirm the occupational method of work
 PD
K1 how to summarise project dataQ1
K2 how to assess the available project data and interpret the work methodQ2
K3 how to obtain additional information from alternative sources when the available project data is insufficientQ3
K4 how to identify work methods against technical and project criteria to make the best use of resources and meet project, statutory and contractual requirementsQ4
K5 how methods of work can achieve zero or low carbon outcomesQ5
K6 how to confirm and communicate the work method to relevant peopleQ6
K7 how to apply the principles of equality and diversity when communicatingQ7
HM80
Operate plant or machinery for non-operational
activities
 
 PD
K2 the types of information, their source and how they are interpretedQ1
K3 the organisational procedures to solve problems with the information and why it is important they are followedQ2
K12 the organisational procedures for requisitioning consumables and other resourcesQ3
K13 the characteristics, quality, uses, sustainability, limitations and defects associated with plant resources and how defects should be rectifiedQ4
K15 the organisational procedures to select resources, why they have been developed and how they are usedQ5
K16 the hazards associated with the resources and methods of work and how they are overcomeQ6
K19 how methods of work, to meet the specification, are carried out and problems reportedQ7
K20 how maintenance of plant and/or machinery, tools and equipment is carried outQ8
HM4J
Diagnose faults in plant or machinery systems or
components
 
 PD
K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implementedQ1
K2 the types of information, their source and how they are interpretedQ2
K3 the organisational procedures to solve problems with the information and why it is important they are followedQ3
K9 the characteristics, quality, uses, sustainability, limitations and defects associated with the resources and how defects should be rectifiedQ4
K10 how the resources should be used and how any problems associated with the resources are reportedQ5
K11 the organisational procedures to select resources, why they have been developed and how they are usedQ6
K12 the hazards associated with the resources and methods of work and how they are overcomeQ7
K15 how methods of work, to meet the specification, are carried out and problems reportedQ8
K16 how maintenance of tools and equipment is carried outQ9
HM4H
Determine and complete service to maintain plant or machinery 
 PD
K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implementedQ1
K2 the types of information, their source and how they are interpretedQ2
K3 the organisational procedures to solve problems with the information and why it is important they are followedQ3
K9 the characteristics, quality, uses, sustainability, limitations and defects associated with the resources and how defects should be rectifiedQ4
K10 how the resources should be used and how any problems associated with the resources are reportedQ5
K11 the organisational procedures to select resources, why they have been developed and how they are usedQ6
K12 the hazards associated with the resources and methods of work and how they are overcomeQ7
K15 how methods of work, to meet the specification, are carried out and problems reportedQ8
K16 how maintenance of tools and equipment is carried outQ9
Determine and advise on the viability of repair or replacement for returning plant or machinery to service 
 PD
K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implementedQ1
K3 the organisational procedures to solve problems with the information and why it is important they are followedQ2
K4 the level of understanding operatives must have of information for relevant, current legislation and official guidance and how it is appliedQ3
K9 the characteristics, quality, uses, sustainability, limitations and defects associated with the resources and how defects should be rectifiedQ4
K10 how the resources should be used and how any problems associated with the resources are reportedQ5
K11 the organisational procedures to select resources, why they have been developed and how they are usedQ6
K12 the hazards associated with the resources and methods of work and how they are overcomeQ7
K15 how methods of work, to meet the specification, are carried out and problems reportedQ8
K16 how maintenance of tools and equipment is carried outQ9
HM58
Install plant or machinery for operational activities
 PD
K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implementedQ1
K3 the organisational procedures to solve problems with the information and why it is important they are followedQ2
K4 the level of understanding operatives must have of information for relevant, current legislation and official guidance and how it is appliedQ3
K9 the characteristics, quality, uses, sustainability, limitations and defects associated with the resources and how defects should be rectifiedQ4
K10 how the resources should be used and how any problems associated with the resources are reportedQ5
K11 the organisational procedures to select resources, why they have been developed and how they are usedQ6
K12 the hazards associated with the resources and methods of work and how they are overcomeQ7
K15 how methods of work, to meet the specification, are carried out and problems reportedQ8
K16 how maintenance of tools and equipment is carried outQ9
HM55
Hand over plant or machinery to the control of
others
 
 PD
K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implementedQ1
K3 the organisational procedures to solve problems with the information and why it is important they are followedQ2
K4 the level of understanding operatives must have of information for relevant, current legislation and official guidance and how it is appliedQ3
K9 the characteristics, quality, uses, sustainability, limitations and defects associated with the resources and how defects should be rectifiedQ4
K10 how the resources should be used and how any problems associated with the resources are reportedQ5
K11 the organisational procedures to select resources, why they have been developed and how they are usedQ6
K12 the hazards associated with the resources and methods of work and how they are overcomeQ7
K15 how methods of work, to meet the specification, are carried out and problems reportedQ8
K16 how maintenance of tools and equipment is carried outQ9
HN27
Provide technical information, advice and guidance to users of plant or machinery 
 PD
K1 the organisational procedures developed to report and rectify inappropriate information and unsuitable resources, and how they are implementedQ1
K3 the organisational procedures to solve problems with the information and why it is important they are followedQ2
K4 the level of understanding operatives must have of information for relevant, current legislation and official guidance and how it is appliedQ3
K9 the characteristics, quality, uses, sustainability, limitations and defects associated with the resources and how defects should be rectifiedQ4
K10 how the resources should be used and how any problems associated with the resources are reportedQ5
K11 the organisational procedures to select resources, why they have been developed and how they are usedQ6
K12 the hazards associated with the resources and methods of work and how they are overcomeQ7
K15 how methods of work, to meet the specification, are carried out and problems reportedQ8
K16 how maintenance of tools and equipment is carried outQ9