sales@fdetraining.co.uk
Tel: 01506 871375
MENU
close menu
close menu
Home
Gallery
FAQs
Policies
Resources
Reviews
Associates
Open Courses
Funded Qualifications
Contact Us
Locations
Enquiry Form
Log In
yes
Forward Tipping Dumper – Theory Test (In-House)
Forward Tipping Dumper Theory Test (In house)
First Name
Last Name
12. If a defect is found during pre-shift checks you should?
Report it when you next see your supervisor
Report it at the end of the day’s work
Report it immediately
9. When tipping into an excavation the danger area is?
A distance equal to the depth of the excavation from the side of the excavation (angle of repose)
It will depend on the weight and size of the dumper
To be decided by operator
15. Why is it important not to overload the dumper?
Extra pressure on the dumpers front axle could lead to machine damage and reduce stability
You may not be able to see over the load reducing visibility
Both of these answers
18. An orange flashing beacon should be used?
Only when transporting a dumper with a loaded skip
At all times whilst operating the dumper
When operating on the public highway only
10. When is the recommended time to refuel a diesel powered dumper?
At the end of the shift
When the gauge shows the fuel level as half empty
In the morning prior to starting work
13. What is the most important reason to wear suitable gloves when handling diesel and engine oil?
Because you were told to do so by your supervisor
To keep your hands clean
To help prevent skin disease
5. The dumper should be driven around site?
In low gear at all times
Fast to get the work done quickly
At a suitably safe speed consistent with the site rules and conditions
3. Dumpers should only be operated on site by individuals who?
Think they can operate a dumper safely
Holds a current driving license
Have received adequate training and are authorised by their employer
2. When using the dumper to tow an attachment, why should the dumper skip be a least a quarter full?
Both of the above
To aid stability
To aid traction
4. In winter months the radiator should be topped up with?
Distilled water
Hot water
The correct mixture of water and antifreeze
16. If leaving the dumper unattended the operator should?
Park on firm level ground, engage parking brake, place in neutral, switch off and remove key
Park on firm level ground, engage parking brake, switch off and remove key
Park on firm level ground, engage parking brake, and leave the engine running for the next operator
8. What type of skip should NOT be used for carrying rubble?
A rotatable skip
A Narrow-mouthed concrete skip
A general purpose skip
11. Seat belts should be worn at all times when operating a dumper except:
When stated otherwise in a risk assessment or method statement
When travelling the dumper over rough terrain only
If the operator finds them uncomfortable
7. What is the purpose of stop blocks?
To hold the dumper when parked on an incline
So you can approach an excavation quickly
To prevent the dumper over-running the edge of the excavation
1. Which of these statements is correct regarding free-wheeling the dumper down a slope?
the dumper speed can increase quickly becoming uncontrollable leading to possible overturning
The dumpers speed will only increase slightly and will be controllable
Freewheeling is acceptable providing you feather the breaks
14. What must you do if involved in an accident whilst at work?
Report it to the Health and safety executive (HSE)
Keep the incident to yourself as you may be prosecuted
Enter it in the site accident book
17. How can the operator ensure that the material is discharged cleanly?
Shake the steering from side to side
Jerk the hydraulics violently up and down
Raise the skip fully and reverse back slowly to clear the load
19. What safety precautions should be used when working under a raised skip?
Articulating lock
Skip prop, engine off and key removed
Both of these answers
20. Where would you find information about the grade of engine oil for the dumper?
From your supervisor or manager
It does not matter any grade of oil is suitable
In the operators manual or from the chart in the engine compartment
6. What is the main reason for reducing speed when cornering?
To save loss of load from the skip
To help prevent the dumper overturning
To reduce wear on tyres
Candidate Signature
Sign Here
Submit Form